Solar Panel Battery Charge Time Calculator
Estimate time to refill a battery from solar when the controller and devices running during charging limit the power available.
Your result
- Energy needed in the battery
- 600 Wh
- Net charging power
- 120 W
- Equivalent charging hours
- 5
- Estimated days at this sunlight
- 1.25
Saved results stay in this browser.
Saved calculations and CSV
How the calculation works
Multiply the change in state of charge by usable battery watt-hours. Derate the panel power for real conditions and conversion, cap it at the usable charging power, then subtract simultaneous loads on the battery side. Divide the required watt-hours by the net charging watts.
A controller-limited example
A 1,200 Wh battery needs 600 Wh to go from 30% to 80%. A 200 W array derated to 80% can deliver 160 W before a 150 W charge limit. A 30 W load leaves 120 W for the battery, requiring five equivalent full-output hours.
Convert charging hours into a weather estimate
At four peak-sun hours per day, five equivalent charging hours represent about 1.25 days in this model. Weather, charge taper and energy used outside the charging window change the actual time.
Victron solar controller manual on configuring charge limits